Amanda and I wanted to hang our coffee filters in a little nook above our coffee grinder, and I happened to have a lot of free time on my hands back in April, so I decided to make one.

This one by Yoshitaka NakayaArchived Link that inspired me:

I didn’t really have much of a side view, but this was enough to go off of.

For the wood, I decided to use a strip of maple I had. I planed it down to the thickness I wanted, then worked on figuring out the angle and overall width of the holder.

Next I cut a walnut accent piece and transferred the size onto the wooden holder and then chiseled that out and inlayed the walnut.

Then I chiseled notches for the end pieces.

Last I glued everything up, let it dry, sanded, added the back piece for a hanger, and coated it with a clear satin wipe-on polyurethane.

It holds about 20 Chemex filters and looks great on the wall!

Here is a quick sketch with dimensions:

If I make one again. I’d probably cut the middle piece out of a single piece of wood instead of trying to join two pieces. I unfortunately didn’t have a wide enough piece of wood to use and there was a pandemic on, so I made due.